Profile 970 Frames - Assembly Instructions |
|
|
 |
[1] Locate and Mouldings and Corner Clips
(4 per frame) |
[2] Clips slide into back
of mouldings. Note Orientation! |
[3] Push clips until round tab snap/locks into position. |
 |
|
 |
[4] Install Corner Clips on either the short or long mouldings - NOT both.
|
[5] Assemble 3 sides of the frame snapping into the corner clips. |
[6] Push mouldings until clips snap/lock into position.. |
 |
|
 |
[7] Slide backing/artwork/glazing etc. into the front channel of the frame mouldings. |
[8] Install the last moulding. Ensure clips lock into the mouldings. |
[9] Assembly is complete. |
Profile 970 Frames - Dis-Assembly Instructions |
|
[1] Slightly push DOWN on tabs on each of 2 opposite corner clips to unlock the clips from the mouldings |
[2] Simultaneously push up on the moulding to open the frame.
|
[3] Dis-assemble remaining mouldings and clips in a similar manner, as required. |
